【水世界】的前製設定與現場劇照
WATERWORLD (1995)
In celebration of today’s anniversary of this wet mess/epic. Let’s celebrate the hard work this crew put into bringing this world to life. Water movies are never easy but when it comes to this movie anytime you bring it up and a crew member from it is in earshot, the stories pour out. Not always bad, I know a AC that said he had a blast, he loved the boat rides out and all the camaraderie the crew had to have to get thru it. To all the crew that helped bring WATERWORLD to life, We salute you and thanks for the memories. I personally enjoy this hot mess of a movie, it’s one of the last ones of its kind...done practically...in a way.
let’s take a deepest of dives into WATERWORLD
The director, Kevin Reynolds, knew there would be problems before production had even started, “During pre-production. Because having never shot on water to that extent before, I didn’t really realise what I was in for. I talked to Spielberg about it because he’d gone to do Jaws, and I remember, he said to me, “Oh, I would never shoot another picture on water”.
“When we were doing the budget for the picture, and the head of the studio, Sid Sheinberg, we were talking about it and I said, “Steven told me that on Jaws the schedule for the picture was 55 days, and they ended up shooting a 155 days”. Because of the water. And he sat there for a moment and he said, “You know, I’m not sure about the days, but I do know they went a hundred percent over budget”. And so, Universal knew the potential problems of shooting on water. It’s monstrous.”
The film began with a projected budget of $100 million which had reportedly increased to $175 million by the end of production. The principle photography had overrun for at least thirty days more than originally planned due to one major decision.
Whereas today they would film in water tanks with partially built sets, employing green screens to fake the locations, back in 1995 they decided to build everything full size and shoot out on the ocean.
This causes extra logistical problems on top of those that already come with making a major action blockbuster. Cast and crew have to be transported to sets. The camera boats and sets float out of position and will have to be reset between takes taking up valuable production time.
The first draft of Waterworld was written by Peter Radar, a Harvard graduate who wanted to break into the film business. His contact in the film industry was Brad Kevoy, an assistant to the legendary director Roger Corman.
Roger Corman is best known for making films very quickly on a small budget. He also liked to give young talent a chance to direct and write their own films. Brad informed Peter that if he could write a Mad Max rip off, he would arrange to finance and let him direct the picture.
Radar came back and pitched the idea for what would become Waterworld. Kevoy took one look at him and said,
“Are you out of your mind? This would cost us three million dollars to make this movie!”
So Radar kept hold of the idea and decided to re-write the script but, this time, going wild. He wrote what he wanted to see on-screen, limited only by his imagination, not a real world production budget.
He managed to get the newly written script shown to a pair of producers with whom he had made contact with. They loved it and ironically they passed it onto Larry Gordon. He shared the enthusiasm saying it had the kind of cinematic possibilities he was looking for. A deal was signed on Christmas Eve of 1989.
As further script rewrites progressed, it became clear that Waterworld was too big for the Larry Gordon’s production company to undertake by themselves. In February 1992, a deal was signed with Universal Pictures to co-produce and co-finance the film. This was now six years after the first draft had been written.
Universal had signed director Kevin Reynolds to Waterworld. Whilst he was finishing his latest film, Rapa Nui, pre-production for Waterworld was already underway.
The decision was taken that the largest set for the film, known as the atoll, would be built full size. The atoll was the primary location for film and in the story served as the location for a small population of survivors.
The logic behind this decision was due to the high percentage of live action filming required in this location, as well as a huge action set piece. No sound stage would be big enough to incorporate this number of scenes and it was crucial that we see the mariner sail his boat into the atoll, turn around and set out again. A full-size construction was the only way to go as the use of miniature and special effects would be impractical.
The next problem was deciding where to build this huge set. After much research, Kawaihae Harbour in Hawaii was chosen as the location. The atoll could be constructed in the harbour and rotated when needed thus allowing for open sea in the background. Later towards the end of principle photography, the atoll could be towed out into the open sea for the filming of the big action sequences which would be impractical to shoot in an enclosed harbour.
Director Kevin Reynolds also discussed the possibility of using the same water tank as James Cameron’s The Abyss, which had filmed there around five years ago,
“We had even entertained the notion of shooting at that big nuclear reactor facility where they had shot The Abyss, to use it for our underwater tank. But we found it in such a state of disrepair that economically it just wasn’t feasible. We didn’t have as much underwater work as they did. Most of The Abyss is interiors and underwater and model work, ours is mostly surface exterior.”
The production company had originally envisioned building the atoll by linking approximately one hundred boats together and building upon this foundation, just like the characters in the film. The production crew set out to search Hawaii and get hold of as many boats as possible.
During this search, a unique boat in Honolulu caught their attention. Upon further investigation, they discovered it was built by Navitech, a subsidiary of the famous aircraft production company, Lockheed.
They approached Lockheed with the strange request of figuring out how they could build the foundations of the atoll. Lockheed found the request unusual but didn’t shy away from the challenging. They agreed to design the atoll foundation and Navitech would construct it.
Meanwhile, an 11ft miniature model of the atoll was sent out to a model ship testing facility in San Diego. Scaled wave tanks are used to determine the effects of the open sea on large scale miniature models of new untested ship designs. This would help determine what would happen with the unusual design of the atoll when it was out of the harbour.
The atoll, when finished, was approximately ¼ mile in circumference. It took three months to construct and is rumoured to cost around $22 million. As the atoll would be used out on the open sea, it required a seafaring license. Nothing like this had been done before and after much deliberation, it was eventually classed as an unmanned vessel. This meant that all cast and crew would have to vacate the set whilst it was towed into position. By the end of production, the atoll was towed out to sea a total of five times.
Shooting out on the open sea presented a series of logistical problem as Reynolds describes,
“We had an entire navy, basically – I mean, this atoll was positioned about a mile off-shore in Hawaii, it was anchored to the bottom of the ocean so it could rotate. What you don’t think about are things like, you’re shooting on this atoll to maintain this notion that there’s no dry land, you always have to shoot out to sea. Away from the land. So we chose a location where we had about a 180 degree view of open water. Nevertheless, any time when you’re shooting, there could be a ship appear in the background, or something like that, and you had to make a choice. Do I hold up the shot, wait for the ship to move out, or do we shoot and say we’re going to incur this additional cost in post-production of trying to remove the ship from the background.
And at that time, CGI was not at the point it is now, it was a bigger deal. And so, even though if you’re shooting across the atoll and you’re shooting out onto open water, when you turn around and do the reverses, for the action, you had to rotate the entire atoll, so that you’re still shooting out to open water. Those are the kinds of things that people don’t realise.
Or something as simple as – if you’re shooting a scene between two boats, and you’re trying to shoot The Mariner on his craft, another boat or whatever, you’ve got a camera boat shooting his boat, and then the other boat in the background. Well, when you’re on open water things tend to drift apart. So you have to send lines down from each of those boats to the bottom, to anchor them so that they somewhat stay in frame. When you’ve got a simple shot on land, you set up the camera position, you put people in front of the camera and then you put background in there. But when you’re on water, everything’s constantly moving apart, drifting apart, so you have to try to hold things down somewhat.
And these are simple things that you don’t really realise when you’re looking at it on film. But logistically, it’s crazy. And each day you shoot on the atoll with all those extras, we had to transport those people from dry land out to the location and so you’re getting hundreds of people through wardrobe and everything, and you’re putting them on boats, transporting them out to the atoll, and trying to get everybody in position to do a shot. And then when you break for lunch, you have to put everybody on boats and take them back in to feed them.”
The final size of the atoll was determined by the size of the Mariners boat, the trimaran. The dimensions for the trimaran were finalised very early on in pre-production, allowing all other vehicles and sets to be sized accordingly.
Production required two trimarans boats which are so called because they have three hulls. The first was based on the standard trimaran blueprint and built for speed but also had to accommodate a secret crew below decks.
During wide and aerial shots it would have to look like Costner himself was piloting the boat. In reality, a trained crew could monitor and perform the real sailing of the boat utilising specially built controls and television monitors below deck.
The second trimaran was the trawler boat which could transform into the racer through the use of special practical effects rigs. Both of these boats were constructed in France by Jeanneau. Normally this type of vessel requires a year to construct but production needed two boats in five months!
Normally once the boat had been constructed, Jeammeau would deliver it on the deck of a freighter, requiring a delivery time of around a month. This delay was unacceptable and so the trimarans were dismantled into sections and taken by a 747 air freighter to the dock Hawaii. Upon arrival, a further month was required to reassemble the boat and get them prepared for filming.
sets recreating the inside of the tanker were built using forced perspective in a huge 1000ft long warehouse which had an adjoining 2000ft field. In this field, they built the set of the oil tankers deck, again constructed using forced perspective. Using the forced perspective trick, the 500ft long set could be constructed to give the impression that it was really twice as long.
There’s more to a film than just it’s sets and filming locations. Over two thousand costumes had to be created with many of the lead actors costumes being replicated many times over due to wear and tear.
This is not an uncommon practice for film production, but due to the unique look of the people and the world they inhabit, it did create some headaches. One costume was created with so many fish scales the wardrobe department had to search the entire island of Hawaii looking for anyone who could supply in the huge quantity required.
Makeup had to use waterproof cosmetics, especially on the stunt players. As everyone had a sun burnt look, a three-sided tanning booth was setup. The extras numbering in their hundreds, with ages ranging from six to sixty-five, passed through the booth like a production line to receive their spray tan. The extras then moved onto costume before finally having their hair fixed and becoming ready for the day.
In some scenes, extras were actually painted plywood cutouts to help enhance the number of extras on the set. This can easily be seen in one particular shot on board the Deez super tanker.
Filming on the water is not only a difficult and time-consuming process but also very dangerous. It’s been reported that Jeanne Tripplehorn and Tina Majorino nearly drowned on their first day of filming.
Waterworld’s star Kevin Costner reported having a near-death experience when filming a scene in which the mariner ties himself to his catamaran to survive a storm. The pounding water caused him to black out and nearly drown.
Unbeknownst to most of the crew, Kevin Costner’s stunt double was riding his jet ski across 40 miles of open ocean between his home on Maui and the film’s set on the Big Island. When he didn’t show up for work one day, the production team phoned his wife, who informed them he had already left for work. The stunt double’s jet ski had run out of gas halfway through his “commute” and a storm had swept him farther out to sea. It took a helicopter most of the day to find him. The stunt doubles name was Laird Hamilton.
As well as the logistical problems of creating a film of this scale and on water, they also had to deal with the press who seemed intent on wanting the film to fail. Director Kevin Reynolds discusses the situation,
“It was huge, we were constantly fighting – people wanted to have bad press. That was more exciting to them than the good news. I guess the most egregious example of that that I recall was that the publicist told me that one day…we’d been out the day before and we were doing a shot where we sent two cameras up on a mast of the trimaran and we wanted to do a shot where they tilled down from the horizon down to the deck below. We’re out there, we’re anchored, we’re setting the shot up and a swell comes in, and I look over and the mast is sort of bending.
And I turned to the boatmaster and I said, “Bruno, is this safe?”. And he looks up the mast and he goes, “No”. So I said, “Okay, well, we have to get out as I can’t have two guys fall off from 40 feet up”. So, we had to break out of the set-up, and go back in a shoot something else and we lost another half-day.
Anyway, the next day the publicist is sitting in his office and he gets this call from some journalist in the States and he goes, “Okay. Don’t lie to me – I’ve had this confirmed from two different people. I want the facts, and I want to hear about the accident yesterday, we had two cameramen fall off the mast and were killed”.
And, he goes, “What are you talking about?”. And he goes, “Don’t lie to me, don’t cover this up, we know this has happened”. It didn’t happen! People were so hungry for bad news because it was much more exciting than…they just said it, and you know, it hurt us.”
Upon release, the press seemed to be disappointed that the film wasn’t the massive failure they were hoping it to be. Universal Studios told Kevin Reynolds that one critic came out of an early screening in New York and in a disappointed tone said,
“Well, it didn’t suck.”
It is true that during principle photography the slave colony set sank and had to be retrieved. However due to bad press, the rumour became much bigger and to this day when you mention the sinking set, most people assume it was the huge atoll.
During production, press nicknamed the film “Kevin’s Gate” and “Fishtar”, referring to 1980’s box office failures Heaven’s Gate and Ishtar. Heaven’s Gate failed so badly it led to the sale of United Artists Studio and has become synonymous with failure in Hollywood.
As well as the exaggerated set problems and other various production rumours, there were also difficulties with the script. In a risky move, the film was green lit and moved into production without a finalised script.
The final total is a reportedly thirty-six rewrites. One of the writers involved was Joss Whedon. Joss had worked on many scripts before becoming a director having being at the helm of both The Avengers and the sequel Avengers: Age Of Ultron. He described his experience on Waterworld as,
“Seven weeks of hell”
Everything came to a head just three weeks before the end of principle photography. Kevin Reynolds who was an old friend of Kevin Costner allegedly walked off set or was fired. There was no official statement on what happened.
When Reynolds left the production this event caused many changes to be made. Composer Mark Isham had already composed approximately two-thirds of the film’s score by the time Reynolds left and that event ultimately caused him to leave production. As Mark describes in this interview excerpt,
“Kevin Reynolds quit the film, which left me working for Kevin Costner, who listened to what I had written and wanted a completely different point of view. He basically made a completely different film — he re-cut the entire film, and in his meeting with me he expressed that he wanted a completely different approach to the score. And I said, “oh let me demonstrate that I can give that to you”, so I presented him with a demo of my approach to his approach, and he rejected that and fired me. What I find a lot in these big films, because the production schedules are so insane, that the directors have very little time to actually concentrate on the music.”
Rumours report that Costner took control of production. He directed the last few weeks of principle photography and edited the final cut of the film that was released in cinemas.
Reynolds discusses his surprise at discovering that one of the most famous scenes from what is known as the extended version, was left on the cutting room floor,
“…it would have differed from what you saw on the screen to some extent, and one of the things I’ve always been perplexed by in the version that was released, theatrically, although subsequently the longer version included it, and the reason that I did the film, was that at the very end of the picture, at the very end of the script, there’s a scene when they finally reach dry land and The Mariner’s sailing off and he leaves the two women behind, and in the script they’re standing up on this high point and they’re watching him sail away, and the little girl stumbles on something.
And they look down and clear the grass away and that’s this plaque. And it says, “Here, near this spot, 1953, Tenzing Norgay and Edmund Hillary first set foot on the summit of Everest”. And that was in script and I was like, “Oh, of course! Wow, the highest point on the planet! That would have been dry land!”. And we got it! We shot that. And they left it out of the picture. And I’m like, “Whaaat?!”. It’s like the Statue of Liberty moment in Planet of the Apes. And I was like, “Why would you leave that out?”
Written by John Abbitt | Follow John on twitter @UKFilmNerd
If any the crew cares to share any of their experiences on it please comment.
Thanks for reading
If you want more deep dives visit
https://www.facebook.com/groups/crewstories/?ref=share
同時也有5部Youtube影片,追蹤數超過304萬的網紅MosoGourmet 妄想グルメ,也在其Youtube影片中提到,We made a OREO charm using almost entirely material from the 100 yen shop! We're not great at drawing so we colored into decals. You can enjoy creatin...
frame board design 在 Sayo Momo Cosplayer Facebook 的最佳貼文
CONNECTED COSPLAY: SPOTLIGHTING COSPLAYERS WITH TALENT FROM AROUND THE WORLD! From VIET NAM
Q & A
Name: Sayo Momo
Location: Viet Nam
Occupation: 2nd High school studen
Website: https://www.facebook.com/sayo.momo.cosplay?fref=ts
Credits: (Photographers ect.) Dragon Nobita photography , Iceking Photography , Soup cosplay Studio , Tam Nguyen Photography , Truc Thanh Huynh
When and how did you get started in Cosplay?
I have been copslaying since December of 2013 (when I were 15 years old) . At that time , my Anime Manga club at school knew and joined cosplay . Then we were preparing our first cosplay , Death Note , I just help them for make up but I love cosplay since that
What was your first Cosplay?
My first cosplay was Airi Ban in Devil Survivor2 . It was a girl who can summon gods from her phone
What was the most difficult character?
The hardest character I have ever done was Charles Bonaparte in Freezing because her expression was so hard to react or to be copied . Charles is a girl who has 2 oposite personalities , so is kind of hard to practice action like her it and roleplay her
What characters are you planning for the future?
Hoppo from Kantai Collection , Tina Sprout from Black Bullet will be my next cosplay projects
Are there any helpful hints in sewing, costume design or any other aspects of your cosplay that you discovered in doing your creations?
I often style my wigs for my characters from basic wigs and I know how to make wigs become harder by using eva foam and dye my wigs to be brighter
Do you have a preferred brand of make up in your cosplay? And if so why?
My most favourite make up brand is Costal Scent because the eye color make up board is kind of cheap and when you do the make up , the color will be so beatiful , suitable for cosplay make up and the coverage of concealer or good too
What are you listening to?
I like listening to Sia’s music like Titanium , she wolf because the songs make the listener feel lively
Favorite Movies?
My favorite movies is series of Final destination , SAW , step up , Big hero 6 , Guardians of galaxy , Pacific Rim
Favorite Animes?
My favorite anime is Black Bullet , Toradora , Kill la Kill , No game No life , Kiseiju , Kantai Collection , Akame ga Kill , Danganronpa , Devil Survivor 2
Favorite TV Shows?
American next top model , Master chef , How I met your mother , My cat from hell
Is there a scene from a anime. cartoon, movie or tv show that left a big impression on you and what was it?
A scene from a anime that left a big impression on me was when Charles Bonaparte sacrificed her arm to save the enemy from being eaten by Nova. Before she died, she had remembered when she was an orphan then she had been regretted for not listening to her comrade. Leaving her pride behind, she had called out loud hopelessly though, to find someone that could help her friend
Books?
The Umbrella for the smart choices
Games?
Mad father , Devil survivor , Fatal frame , Leage of legends
Beverage?
Mocha , Hot chocolate , Soda Blue Ocean , Coconuts
Fast Food or Junk Food of choice?
I don’t know why but I think I like eating Junk food
Candy bar?
I don’t eat candy much *teehee tongue emoticon *
Favorite Breakfast cereal?
in Viet Nam we usually eat rice or drink milk for breakfast actually I never eat cereal before pacman emoticon pacman emoticon
Is there something not going on in the cosplay world that you would want to see or is there something you would want to change?
If I could change one thing in cosplay's world , I hope that everyone have more open-minded view about cosplay, especially, the parent and cosplayers understand the true meanning of this passion
What was your favorite toy growing up?
My favorite toy always is water bubble pacman emoticon its help me relax a lot
Who is your biggest character crush and why?
My biggest character crush is Erza in Fairy Tail , because she so beautiful as a Titania , very strong from inside to outside , I wish I will be like her someday
You enter a warehouse. Their is little light, but you are able to find you way around. The sound of music draws you to corner of the warehouse. The are FIVE GHOUL CLOWNS, playing a dancing video game. The have razor sharp teeth and scary weapons. Magic can not affect them, They sense your presence and turn facing you. The run to you to attack. Time to fight! What character would you want to be to defeat them and how would you handle the situation?
8 part of Charles will be destroy them easily with her blade and the moonlight sonata colonthree emoticon
If you had to be chained with a character for one year, what would be the character and what would you do?
that would be Doreamon hehe
You can have dinner with your favorite character. And at this dinner you may ask one question. Who would be the character and what would be your one question?
My favorites character I want to have a dinner with is Kise Ryouta heart emoticon I’ll ask him to marry me
What's number 1 on your bucket list? (Something you want to do before you leave the planet).
Free jump out from top of the world heart emoticon ( highest building) YOLO
What advice would you give to people getting started in Cosplay?
You should know how to make up for yourself first because only you can make you beauty heart emoticon
frame board design 在 MosoGourmet 妄想グルメ Youtube 的最讚貼文
We made a OREO charm using almost entirely material from the 100 yen shop! We're not great at drawing so we colored into decals. You can enjoy creating cheap DIY's thanks to 100 yen shops like Cando or Daiso. We live in blessed times!
We received a comment that said that MosoGourmet seem to only make food crafts, but recently we've been getting the itch to get into things such as sewing and other handicrafts!
*Recipe*
1. Cut the plastic molds from Cando into 5cm squares, write the direction of the plate, and do a test bake. It is convenient to know the characteristics of the board because it shrinks and warps differently depending on them.
2. Mark it with masking tape so that you can see the vertical and horizontal directions and the front and back of the mold.
3. Cut the mold. If you want to make several, make the design face the same direction. The mold should be neatly shrunk by now.
4. File the entire surface so that the back of the mold is curved, with a #400 file from Daiso.
5. When the entire unit becomes white, remove any debris with a wet tissue.
6. When the plastic base has dried, use a pencil to trace onto pattern paper the face that was filed down.
7. Color in with color pencils. This time, we used a watercolor pen. Watercolor pencils are sold in 12 colors at Cando and Daiso.
8. In the case of a watercolor pen, blur the color with a brush (from Daiso) containing a small amount of water (Daiso also sells paint plates). It ’s okay as it is.
9. Cut a little inside the frame with scissors or a cutter.
10. Bake in a preheated toaster oven for about 2 minutes. Put it on the oven sheet (colored side up) and keep it in the oven toaster, keeping an eye on it while it shrinks. When it stops shrinking, take a breath and take it out the oven sheet.
11. Place it on a hard, flat surface that is resistant to heat and press it with a metal tray. Be careful, it's hot!
12.Make the shrink plastic colored OREO cookie and vanilla cream in the same way. We made a vanilla cream-colored one a little smaller.
13. When it cools down, apply your favorite top coat. This time, we used a water-based topcoat spray (a matte "Mr.hobby"). When it dries up, spray it on the back side (the colored side) to prevent discoloration.
14. Attach your favorite accessories. This time, we drilled holes in it with a hand drill (from Cando) and a pin vice, and attached a crab that I bought at Daiso. Round-nosed pliers and finger holders can be purchased at a 100 yen shop.
15. All done. We'd like to make it again!
大好きなオレオのキーホルダーを作りました。まだまだ修行が足りませんが、ほぼ100均アイテムで作れるプラバン工作、楽しいです。(クッキングシート使用上の注意 https://www.lion.co.jp/ja/products/246 )
*レシピ*
1.プラバン(キャンドゥ)は5センチ四方に切り、板の方向を書き込んで試し焼きをする。板によって縦横の縮み方、反り方が異なるので、その板の性格を知っておくと便利です。
2.プラバンの縦横の方向と表裏が、わかるようにマスキングテープなどで印を付ける。
3.プラバンを切る。いくつか作る場合はデザインの縦横を同じ方向にする。プラバンの縮み方が揃ってきれいに仕上がる。
4.プラバンの表裏を400番のヤスリ(ダイソー)でくるくると全面ヤスル。
5.全体が白くなったらウエットティッシュなどでゴミを落とす。
6.プラバンが乾いたら、裏面にオレオの形を写す。
7.色鉛筆で着色する。今回、水彩色鉛筆を使いました。水彩色鉛筆はキャンドゥとダイソーで12色入りが売られていました。
8.水彩色鉛筆の場合は、少量の水(絵具皿はダイソー)を含ませた筆(ダイソー)で色をぼやかしてもよい。濃くしたいときは乾かないうちに水彩色鉛筆で書き足す。そのままでも大丈夫です。
9.ハサミやカッターを使って枠のほんの少し内側を切る。
10.2分ほど予熱したオーブントースターで焼く。オーブンシートにのせ、オーブントースターに入れると数秒で縮んでくるので目を離さないこと。縮むのが止まったら一呼吸おいてオーブンシートごと取り出す。(クッキングシート使用上の注意 https://www.lion.co.jp/ja/products/246 )
11.熱に強い、固く平らな物の上に置き、金属のバットなどでプレスする。熱いので気をつけて!
12.オレオクッキー色とバニラクリーム色に着色したプラバンも同様に作る。バニラクリーム色のプラバンは一周り小さく作りました。
13.冷めたらお好みのトップコートをする。今回は水性トップコートスプレー(GSIの つや消し)をしました。乾いたら裏面(色鉛筆面)にもスプレーし色落ちを防ぐ。
14.好みのアクセサリーパーツを付ける。今回はハンドドリル(キャンドゥ)やピンバイスで穴を空け、ダイソーで買ったカニカンを付けました。ラジオペンチや指かん(ダイソー)も100円ショップで買うことができます。
14.でけた。次はもっと頑張りたい。
#oreo ##DIY #Charms #ShrinkPlastic #craft #手作り #プラバン #工作 #オレオ
frame board design 在 MosoGourmet 妄想グルメ Youtube 的最佳貼文
We made a charm using almost entirely material from the 100 yen shop! We're not great at drawing so we colored into decals. We used cookie molds because the shape makes it easy to understand what it is even only with the frame. You can enjoy creating cheap DIY's thanks to 100 yen shops like Cando or Daiso. We live in blessed times!
We received a comment that said that MosoGourmet seem to only make food crafts, but recently we've been getting the itch to get into things such as sewing and other handicrafts!
*Recipe*
1. Cut the plastic molds from Cando into 5cm squares, write the direction of the plate, and do a test bake. It is convenient to know the characteristics of the board because it shrinks and warps differently depending on them.
2. Mark it with masking tape so that you can see the vertical and horizontal directions and the front and back of the mold.
3. Cut the mold. If you want to make several, make the design face the same direction. The mold should be neatly shrunk by now.
4. File the entire surface so that the back of the mold is curved, with a #400 file from Daiso.
5. When the entire unit becomes white, remove any debris with a wet tissue.
6). When the mold is dry, place a cookie mold on its surface and take out its shape with the file.
7. Color in with color pencils. This time, we used a watercolor pen. Watercolor pencils are sold in 12 colors at Cando and Daiso.
8. In the case of a watercolor pen, blur the color with a brush (from Daiso) containing a small amount of water (Daiso also sells paint plates). If you want to make it darker, add some color with the watercolor pen before it dries.
9. Cut a little inside the frame with scissors or a cutter. It's difficult to cut the fine parts, so we used eyebrow scissors.
10. Bake in a preheated toaster oven for about 2 minutes. Put it on the oven sheet (colored side up) and keep it in the oven toaster, keeping an eye on it while it shrinks. When it stops shrinking, take a breath and take it out the oven sheet.
11. Place it on a hard, flat surface that is resistant to heat and press it with a metal tray. Be careful, it's hot!
12. When it cools down, apply your favorite top coat. This time, we used a water-based topcoat spray (a matte "Mr.hobby"). When it dries up, spray it on the back side (the colored side) to prevent discoloration.
13. Attach your favorite accessories. This time, we drilled holes in it with a hand drill (from Cando) and a pin vice, and attached a crab that I bought at Daiso. Round-nosed pliers and finger holders can be purchased at a 100 yen shop.
14. All done. We'd like to make it again!
ほぼ100均アイテムでプラバン Shrink Plastic を使ったチャームを作りました。絵心が乏しいので着色は写し絵の色塗りだけ。形も枠だけで何かわかる工夫がされているので、クッキー型を使いました。100円ショップ(キャンドゥ、ダイソー)のおかげで安く手作りが楽しめる。いい時代だ。
妄想グルメは食品工作みたいだってコメントがあったけど、最近、本来の傾向の、お裁縫や工作などクラフト系やりたい虫が疼き出してるな。
(クッキングシート使用上の注意 https://www.lion.co.jp/ja/products/246 )
*レシピ*
1.プラバン(キャンドゥ)は5センチ四方に切り、板の方向を書き込んで試し焼きをする。板によって縦横の縮み方、反り方が異なるので、その板の性格を知っておくと便利です。
2.プラバンの縦横の方向と表裏がわかるようにマスキングテープなどで印を付ける。
3.プラバンを切る。いくつか作る場合はデザインの縦横を同じ方向にする。プラバンの縮み方が揃ってきれいに仕上がる。
4.プラバンの裏を400番のヤスリ(ダイソー)で回すように全面やすりをかける。
5.全体が白くなったらウエットティッシュなどでゴミを落とす。
6.プラバンが乾いたら、ヤスリをかけた面にクッキー型で枠の型を取る。
7.色鉛筆で着色する。今回、水彩色鉛筆を使いました。水彩色鉛筆はキャンドゥとダイソーで12色入りが売られていました。
8.水彩色鉛筆の場合は、少量の水(絵具皿はダイソー)を含ませた筆(ダイソー)で色をぼやかす。濃くしたいときは乾かないうちに水彩色鉛筆で書き足す。
9.ハサミやカッターを使って枠のほんの少し内側を切る。細かい部分は切りづらいので眉毛切バサミを使うとうまくできました。
10.2分ほど予熱したオーブントースターで焼く。オーブンシートにのせ(着色面が上)、オーブントースターに入れると数秒で縮んでくるので目を離さないこと。縮むのが止まったら一呼吸おいてオーブンシートごと取り出す。(クッキングシート使用上の注意 https://www.lion.co.jp/ja/products/246 )
11.熱に強い、固く平らな物の上に置き、金属のトレイなどでプレスする。熱いので気をつけて!
12.冷めたらお好みのトップコートをする。今回は水性トップコートスプレー(Mr.hobbyの つや消し)をしました。乾いたら裏面(色鉛筆の面)にもスプレーし色落ちを防ぐ。
13.好みのアクセサリーパーツを付ける。今回はハンドドリル(キャンドゥ)やピンバイスで穴を空け、ダイソーで買ったカニカンを付けました。ラジオペンチや指かん(ダイソー)も100円ショップで買うことができます。
14.でけた。また作りたい。
#DIY #Charms #ShrinkPlastic #craft #手作り #プラバン #工作
frame board design 在 CarDebuts Youtube 的最讚貼文
2018 Toyota Hilux
The exterior reflects a "tough yet emotional" design expressing power and vigor. The interior features silver highlights throughout along with blue cabin illumination, creating a sense of sophistication. Five colors were selected for the exterior panels, including Nebula Blue Metallic and Crimson Spark Red Metallic, while the interior is black.
The vehicle is equipped with a 2GD-FTV 2.4-liter diesel engine. Offering power performance demonstrating high torque even in the low revolution range, it also demonstrates excellent environmental performance through high thermal efficiency and achieves a fuel efficiency rating of 11.8 km/L1.
The vehicle is outfitted with safety features, including a Pre-Collision System with Pedestrian Detection2 collision avoidance support package to recognize pedestrians, as well as cars. Additionally, Lane Departure Alert2 is an installed feature that helps prevent accidental lane departures.
The vehicle is equipped with a part-time 4WD system that allows the driver to select driving modes at the touch of a dial. The two-wheel drive mode boasts superior quietness and fuel efficiency and is ideal for driving in urban areas and on expressways. This can be switched to four-wheel drive for rough terrain and slippery roads, thus comfort and performance can always be maintained. Also, driving power can be adjusted to suit various road conditions through Hill-start Assist Control, Active Traction Control2, or Downhill Assist Control2. As an authentic 4WD vehicle, it achieves high on- and off-road driving performance.
The vehicle adopts a suspension system that boosts vibration damping, as well as a high-strength frame that ensures excellent running stability and driving comfort both on- and off-road.
By setting the steel bumper at a low position behind the bed, passengers can safely board and disembark when loading and unloading items. Also, large hand grips help passengers enter and exit the cabin with ease.